1. LNG Tank & associated Piping detail Engineering for Australian client
Elixir Consultants UK developed the heat and material balance, performed stress analysis and prepared the associated stress report, performed structural calculation and drawing preparation.
2. Beach Energy Beharra Springs ER
Process Engineering activities carried out:- Permeate Recovery compressor sizng confirmation- CO2 membrane system optimisation- Additional gas cooling optimisation- Pre-treatment vessel sizing- Vertical flare assessment and sizing - flarnet modellingflarenet modelling, flare dispersion modelling, thermal radiation analysis, confirmation of radiation exclusion zone- PSV sizing- Actuated valve sizing- Hydraulis and line sizing- Blowdown calculation and low temperature assessment- Overal H&MB
3. Stress Analysis for the Heytesbury Underground Gas Storage (HUGS) Project of Lochard Energy
The stress analysis scope involves wellhead piping and flow lines associated with wells. Along with stress analysis, the scope includes assessment of Flow Induced Vibration (FIV), Acoustic Induced Vibration (AIV), slug flow analysis, buried pipe analysis, dynamic modal analysis, flange leakage check, etc.
4. Pilgangoora Expansion project in Australia
The stress analysis scope involves wellhead piping and flow lines associated with wells. Along with stress analysis, the scope includes assessment of Flow Induced Vibration (FIV), Acoustic Induced Vibration (AIV), slug flow analysis, buried pipe analysis, dynamic modal analysis, flange leakage check, etc
5. Beach Energy Beharra Springs Gas Plant Permeate Recovery Project -Dispersion Study
Flare Thermal Radiation and Dispersion Scope includes:-Calculation of characteristic compositions and flow properties throughout the system for validation of the existing flare network and design of equipment as required to support the plant’s operation. -Calculation of radiation and gas dispersion based on discharge from the flare. -Determination of sizing scenarios for flare network piping. -Validation of the suitability of the existing vertical flare and KO drum or providing sizing scenarios for the replacement.